I'm getting error about no ETH0/ETH1

This newer system has different network location so as suggested when you first SSH to your new PBX, you need to edit /etc/pbx/.statusnet

Type below:

nano /etc/pbx/.statusnet

and change to below

ALTETH="1"
NEWETH="venet0:0"

Cette réponse était-elle pertinente?

 Imprimer cet article

Consultez aussi

How to access web control panel

NOTE: Console access may require you to use Chrome browser in Private Window. And if issues, try...

I cannot SSH to new server after the move

This usually happens on older system like "PBX in a Flash SILVER 1.7 (dahdi, asterisk 1.4)" so...

I use knockd and not working after move to new system

If you're moved to new system with web control panel, your knockd may not be working so via...

My iptables show error on new system

You just need to SSH or access via noVNC Console and type 2 commands below:mkdir...

How to fix disk in Emergency mode

On FreePBX system, when you force rebooted a server, it may go into Emergency mode with error...