I'm getting error about no ETH0/ETH1

This newer system has different network location so as suggested when you first SSH to your new PBX, you need to edit /etc/pbx/.statusnet

Type below:

nano /etc/pbx/.statusnet

and change to below

ALTETH="1"
NEWETH="venet0:0"

War diese Antwort hilfreich?

 Artikel drucken

Lesen Sie auch

How to increase my KVM account disk space

If you have a KVM plan, by default, the space is 20GB, if you get bigger space, you will need to...

I use knockd and not working after move to new system

If you're moved to new system with web control panel, your knockd may not be working so via...

My iptables show error on new system

You just need to SSH or access via noVNC Console and type 2 commands below:mkdir...

How reinstall from ISO on 64-bit plan

To reinstall from ISO, first go to your client area and Product Details pageThere, you will see...

I cannot SSH to new server after the move

This usually happens on older system like "PBX in a Flash SILVER 1.7 (dahdi, asterisk 1.4)" so...